90mm Sliding Gate Valve (Plastic) | Water Flow Control | BMCo Plumbing

90mm Sliding Gate Valve (Plastic Paddle)

Sliding Gate Valves
Versatile in its application, the Sliding Gate Valve fits into 90mm pipes and allows water flow to be shut off.

Suitable for drainage applications, i.e. emptying a charged rainwater harvesting system.
Size 90mm HW0902


Suitable for low pressure applications (sealing pressure rated to 210kPa)
Manufactured from UV stabilised uPVC with stainless steel hardware.
Can be used as a wet system drain valve on rain harvesting systems.
Suitable for drainage applications.
Ergonomically designed handle, allowing for easy opening and closing.
Compact and robust design.
90mm female socket fit.
  • Specifications

  • Pressure Ratings

  • Installation
    1. Select your desired installation point. The Sliding Gate Valve can be installed in the vertical or horizontal position.
    2. Measure and remove a 35mm section of pipe at your desired installation point. Ensure all cut edges are clean and smooth.
    3. Use priming fluid to clean inside the sockets of the Sliding Gate Valve and outside of the pipes you will be gluing the valve to.
    4. Apply solvent weld glue first to inside the sockets of the Sliding Gate Valve and then to the outside of the pipes, bring together and ensure pipes are inserted fully into the sockets of the Sliding Gate Valve. Hold for a minimum of 60 seconds or until secure.
  • What's in the box?
    • Sliding Gate Valve
  • Tools you might need
    • Marker pen
    • Tape measure
    • Saw
    • Solvent weld glue
    • Priming fluid

Products you may be interested in

Water Diverter
Water Diverter
50mm or 90mm
Easy Tee Junction
Easy Tee Junction
3 Sizes
Fire Plugs
Fire Plugs

Your selection

Add Rain Harvesting or Plumbing products to your list.